亚投彩票|welcome

                                  European EN Standard Grade Summary

                                  Introduction

                                  There are now a large number of EN standards for stainless steel products. It is not always easy to know which grades belong to which standard. You can of course look through the summary of each one on this website. However, this can be quite time consuming. This article is designed to provide a quick guide to check which standard a particular grade appears in.

                                  Standards Covered

                                  Whilst not an exhaustive list, the most common EN standards and a few which are quite specialised are covered.

                                  To go immediately to the Summary click here. This opens up a spreadsheet. The spreadsheet allows you to sort the list of grades in numerical order or by type. If you use this facility you will get a Security warning about Macros. Choose the option Enable Macros. The spreadsheet also contains cross references between the EN numbering system and the AISI system or generic/brand names.

                                  To access a more complete summary of grades and properties click on the appropriate link below:

                                  Standard Description Links
                                  EN 10088-2 Flat Products

                                  Compositions

                                  Mechanical Properties Austenitic

                                  Mechanical Properties Ferritic

                                  Mechanical Properties Martensitic

                                  Mechanical Properties Duplex

                                  Mechanical Properties Precipitation Hardening

                                  EN 10088-3 Long Products Compositions

                                  Mechanical Properties Austenitic

                                  Mechanical Properties Ferritic

                                  Mechanical Properties Martensitic and PH

                                  Mechanical Properties Duplex 
                                  EN 10028-7 Flat Products for Pressure Purposes Elevated Temperature Properties
                                  EN 10272 Long Products for Pressure Purposes Elevated Temperature and Sub zero Properties
                                  EN 10095 Heat Resisting

                                  Compositions

                                  Mechanical Properties

                                  EN 10302 Creep Resisting

                                  Compositions

                                  Mechanical Properties

                                  EN 10296-2 Welded Tubes

                                  Compositions

                                  Mechanical Properties

                                  EN 10297-2 Seamless Tubes

                                  Compositions

                                  Mechanical Properties

                                  EN 10217-7 Welded Tubes for Pressure Purposes

                                  Compositions

                                  Mechanical Properties

                                  EN 10216-5 Seamless Tube for Pressure Purposes Compositions
                                  EN 10253-3 Butt-weld pipe fittings without specific inspection requirements

                                  Compositions

                                  Mechanical Properties

                                  EN 10253-4 Butt-weld pipe fittings with specific inspection requirements

                                  Compositions

                                  Mechanical Properties

                                  EN 10312 Welded Tubes for Water  
                                  EN 10151 Strip for Springs Compositions and Properties
                                  EN 10270-3 Wire for Springs Compositions and Properties
                                  EN 10269 High and Low Temperature Fasteners

                                  Compositions

                                  Mechanical Properties

                                  EN 10264-4 Wire for Rope  
                                  EN 10263-5 Long Products for Cold Extrusion  
                                  EN 10222-5 Forgings for Pressure Purposes  
                                  EN 10250-4 Open Die Forgings  
                                  EN 10283 Castings Compositions

                                  top

                                  Office and Postal Address: BSSA, HQ, Blades Enterprise Centre, John Street, Sheffield S2 4SW

                                  Registered Office: Pegasus House, 463A Glossop Road, Sheffield S10 2QD

                                  Tel: +44 (0)114 292 2636    |     Email: admin@bssa.org.uk

                                  Copyright © 2018 British Stainless Steel Association

                                  web design sheffield by Llama Digital

                                                                  reading

                                                                  mailbox

                                                                  Technology

                                                                  reading

                                                                  video

                                                                  Celebrity

                                                                  Information

                                                                  aviation

                                                                  entertainment